Air receiver tank receives and stores compressed air after it exits the air compressor. This gives you a reserve of compressed air that you can draw on

without running your air compressor.

QQ20211103142820

An air receiver tank, sometimes referred to as a compressed air tank, is an integral part of any compressed air system. The main purpose of air receiver

tank is to provide temporary storage for compressed air, which also helps your air compression system run more efficiently.

Air receiver tank is an essential component of a compressed air system. One properly sized air receiver tank ensures the safe and efficient operation of

system and provides a reservoir of extra power for use during periods of peak demand.

Except storing compressed air that can be used for short and high-demand events, air receiver tank can provide a steady air signal to air compressor

controls. In addition, when it is used as a "wet tank," it acts as a secondary heat exchanger, increasing the efficiency of your air dryer.

shenjiang

Carbon Steel Air Receiver Tank Parameters:

Volume: 0.1m³-100m³

Working pressure: 0.8Mpa~7.0Mpa

Material: Q235B/Q345R

Medium: Air, Steam, Nitrogen, Oxygen, Water

Service life: 10-15 years

Application: Use together with air compressor, air dryer, filter and other equipment

Carbon Steel Air Receiver Tank Model Specification Sheet

Volume/ Working pressure	Designed Temp. ℃	Total Height H	Internal Diameter Φ Φ	Air Inlet			H2	Air Outlet		Support		Drain Valve	Air compressor
				H1	Nominal Diameter	Thread		Nominal Diameter	Thread	Φ1	d		（Reference） Capacity m³/min
0.3/0.8	100	1614	550	667	50	Rp1½″	1217	50	Rp1½″	400	20	R1/2″	2.5～3
0.3/1.0		1616											2.5～3
0.3/1.3	110	1626		668			1218						2.5～3
0.6/0.8	100	2124	650	693	65	Rp1½″	1643	65	Rp1½″	470	20	R1/2″	4.8～6
0.6/1.0		2126		694			1644						4.8～6
0.6/1.3	110	2140		694			1706						4.8～6
1.0/0.8	100	2202	800	800	65	Rp1½″	1840	65	Rp1½″	560	25	R1/2″	8～10
1.0/1.0		2204											8～10
1.0/1.3	110	2206					1920						8～10
1.5/0.8	110	2290	1000	767	65	Rp2″	2067	65	Rp2″	670	25	R1/2″	12～15
1.5/1.0		2290		767									12～15
1.5/1.3		2292		769			2069				24		12～15
2.0/0.8	110	2810	1000	780	80	Rp2″	2280	80	Rp2″	700	24	R1/2″	16～20
2.0/1.0													16～20
2.0/1.3													16～20
3.0/0.8	110	2962	1200	905	80		2205	80		950	24	R3/4″	24～30
3.0/1.0		2964		906			2206						24～30
3.0/1.3		2966		907			2207						24～30
4.0/0.8	110	3060	1400	930	100		2430	100		1050	24	R3/4″	32～40
4.0/1.0		3062		931			2431						32～40
4.0/1.3		3066		933			2433						32～40
5.0/0.8	110	3750	1400	930	100		3130	100		1050	24	R3/4″	40～50
5.0/1.0		3752		931			3131						40～50
5.0/1.3		3756		932			3133						40～50
6.0/0.8	110	4360	1400	930	100		3740	100		1050	24	R3/4″	48～60
6.0/1.0		4632		931			3741						48～60
6.0/1.3		4366		932			3743						48～60
8.0/0.8	110	4552	1600	981	150		3831	150		1200	30	R1″	64～80
8.0/1.0		4554		982			3832						64～80
8.0/1.3		4560		984			3835						64～80
10/0.8	110	3765	2000	1082	150		2933	150		1500	30	R1″	80～100
10/1.0		3766		1083			2933						80～100
10/1.3		3770		1086			2936						80～100
12.5/0.8	110	4714	2000	1132	150		3833	150		1500	30	R1″	100～125
12.5/1.0		4716		1133			3834						100～125
12.5/1.3		4722		1136			3836						100～125
15/0.8	110	5304	2000	1172	150		4174	150		1550	30	R1″	120～150
15/1.0		5306		1174			4175						120～150
15/1.3		5094		1176			4177						120～150
20/0.8	110	5236	2400	1298	200		4200	200		1800	36	R1″	160～200
20/1.0		5240		1300									160～200
20/1.3		5244		1302									160～200
25/0.8	110	6136	2400	1298	200		5095	200		1800	36	R1″	200～250
25/1.0		6140		1300									200～250
25/1.3		6144		1302									200～250
30/0.8	110	7240	2400	1324	200		5774	200		1900	36	R1″	240～300
30/1.0		7400		1325			5775						240～300
30/1.3		6908		1329			5779						240～300
40/0.8	110	8200	2600	1424	200		6724	200		1770	24	DN40	320～400
40/1.0		8200		1426			6726						320～400
50/0.8	110	9007	2800	1506	250		6757	250		3000	30	DN40	400～500
50/1.0													400～500
75/0.8	110	10257	3200	1800	250		8200	250		3400	30	DN40	600～750
75/1.0		10256											600～750

Medium and High Pressure Carbon Steel Air Receiver Tank Model Specification Sheet

Volume/ Working pressure	Designed Temp. ℃	Total Height H	Internal Diameter Φ	Air Inlet		Air Outlet		Support			Drain Valve	Air compressor
Volume/ Working pressure	Designed Temp. ℃	Total Height H	Internal Diameter Φ	H1	Nominal Diameter	H2	Nominal Diameter	Φ1	d			（Reference） Capacity m³/min
0.3/1.6	110	1626	550	668	50	1217	50	400	20	R1/2''		2.5～3
0.3/2.5		1628		670	50	1219	50			Rc1/2''		2.5～3
0.3/3.0		1630		671		1220				Rc1/2''		2.5～3
0.3/4.0		1696		673		1222				Rc1/2''		2.5～3
0.6/1.6	110	2136	650	693	65	1704	65	470	20	R1/2''		4.8～6
0.6/2.5		2404	600	697	50	1997	50	420		Rc1''		4.8～6
0.6/3.0		2406		698	50	1998	50			Rc1''		4.8～6
0.6/4.0		2500		635	65	1945	65			DN25		4.8～6
1.0/1.6	110	2208	800	800	65	1920	65	560	24	R1/2''		8～10
1.0/2.5		2210		748	65	1872	65			Rc1''		8～10
1.0/3.0		2212		750		1872						8～10
1.0/4.0		2214		752		1874						8～10
1.5/1.6	110	2294	1000	770	65	2070	65	670	24	R1/2''		12～15
1.5/2.5		2296		773	80		80			Rc1''		12～15
1.5/3.0		2298		775								12～15
1.5/4.0		2300		794								12～15
2.0/1.6	110	2846	1000	783	80	2282	80	700	24	R1/2''		16～20
2.0/2.5		2930		835		2335				Rp1''		16～20
2.0/3.0		2954		837		2347				Rc1''		16～20
2.0/4.0		2962		841		2350				Rc1''		16～20
3.0/1.6	110	2968	1200	909	80	2210	80	950	24	R3/4''		24～30
3.0/2.5		2670		914	100	2205	100			Rc1''		24～30
3.0/3.0		2972		916	100	2218	100			DN25		24～30
4.0/1.6	110	3068	1400	934	100	2434	100	1050	24	R3/4''		32～40
4.0/2.5		3158		939		2389				DN25		32～40
4.0/3.0		3162		941		2391				DN25		32～40
5.0/1.6	110	3758	1400	932	100	3134	100	1050	24	R1''		40～50
5.0/2.5		3878		954		3104				DN25		40～50
5.0/3.0		3882		956		3106				DN25		40～50
6.0/1.6	110	4368	1400	932	100	3744	100	1050	24	R1''		48～60
6.0/2.5		4578		954		3804				DN25		48～60
6.0/3.0		4582		956		3806				DN25		48～60
8.0/1.6	110	4564	1600	986	150	3837	150	1200	30	R1''		64～80
8.0/2.5		4652		991		3841				DN25		64～80
8.0/3.0		4656		991		3840				DN25		64～80
10/1.6	110	3772	2000	1087	150	2937	150	1500	30	R1''		80～100
12.5/1.6	110	4724	2000	1137	150	3638	150	1500	30	Rc1''		100～125
15/1.6	110	5094	2100	1179	150	4179	150	1550	30	Rc1''		120～150
20/1.6	110	5248	2400	1304	200	4200	200	1800	36	DN25		160～200
25/1.6	110	6158	2400	1304	200	5094	200	1800	36	DN25		200～250
30/1.6	110	6912	2500	1325	200	5775	200	1900	36	Rc1''		240～300

Stainless Steel Air Receiver Tank Parameters:

Volume: 0.1m³-100m³

Working pressure: 0.8Mpa~7.0Mpa

Material: SUS304

Medium: Air, Steam, Nitrogen, Oxygen, Water

Service life: 10-15 years

Application: It has been widely applied to food Industry, medical and pharmaceutical, chemical industry, microelectronics industry.

Stainless Steel(304) Air Receiver Tank Model Specification Sheet

Volume/ Working pressure	Designed Temp. ℃	Total Height H	Internal Diameter Φ	Air Inlet			H2	Air Outlet		Support		Drain Valve	Air compressor
				H1	Nominal Diameter	Thread		Nominal Diameter	Thread	Φ1	d		（Reference） Capacity m³/min
0.3/0.8	110	1612	550	666	50	Rp1½″	1116	50	Rp1½″	400	20	R1/2″	2.5～3
0.3/1.0													2.5～3
0.3/1.3		1614		667									2.5～3
0.6/0.8	110	2134	650	691	65	Rp1½″	1702	65	Rp1½″	470	20	R1/2″	4.8～6
0.6/1.0				692									4.8～6
0.6/1.3		2136		693			1703						4.8～6
1.0/0.8		2258	800	779	65	Rp1½″	1779	65	Rp1½″	560	24	R1/2″	8～10
1.0/1.0		2260	800	780			1780			560			8～10
1.0/1.3		2278	850	794			1794			600			8～10
1.5/0.8	110	2748	900	754	65	Rp2″	2254	65	Rp2″	630	24	R1/2″	12～15
1.5/1.0		2750		755			2255						12～15
1.5/1.3		2752		756			2256						12～15
2.0/0.8	110	2838	1000	794	80	Rp2″	2280	80	Rp2″	700	24	R1/2″	16～20
2.0/1.0		2840		795			2281						16～20
2.0/1.3		2844		797			2282						16～20
3.0/0.8	110	2976	1250	893	80		2393	80		950	24	R3/4″	24～30
3.0/1.0		2978		894			2394						24～30
3.0/1.3		2982		896			2396						24～30
4.0/0.8	110	3072	1400	931	100		2431	100		1050	24	R3/4″	32～40
4.0/1.0		3074		932			2432						32～40
4.0/1.3		3078		934			2432						32～40
5.0/0.8	110	3752	1400	931	100		3031	100		1050	24	R3/4″	40～50
5.0/1.0		3754		932			3032						40～50
5.0/1.3		3758		934			3034						40～50
6.0/0.8	110	4452	1400	931	100		3831	100		1050	24	R3/4″	48～60
6.0/1.0		4454		932			3832						48～60
6.0/1.3		4458		934			3834						48～60
8.0/0.8	110	3756	1800	1033	150		2983	150		1350	30	R1″	64～80
8.0/1.0		3760		1035			2985						64～80
8.0/1.3		3764		1037			2984						64～80
10/0.8	110	3766	2000	1083	150		2933	150		1500	30	R1″	80～100
10/1.0		3770		1085			2935						80～100
10/1.3		4364	1800	1037			3687			1350			80～100

Air Receiver Tank

Air Receiver Tank

Medium and High Pressure Carbon Steel Air Receiver Tank Model Specification Sheet

About Us